Aluminum Electrolytic Capacitors/ SU(Bi-polar) Radial Lead Type Series: SU(Bi-polar) Type: A Features Endurance : 85 C 2000 h RoHS directive compliant Specifications Category Temp. Range -40 C to +85 C Rated W.V. Range 6.3 V.DC to 50 V.DC Nominal Cap. Range 2.2 F to 6800 F Capacitance Tolerance 20 % (120 Hz/+20 C) I < 0.03 CV +3 (A) After 5 minutes DC Leakage Current tan d Please see the attached standard products list. After 2000 hours application of DC working voltage (1000 hours for each polarity) at +85 C2 C, when the capacitors are restored to 20 C, the capacitors shall meet the following limits. Capacitance change 20 % of initial measured value Endurance tan d < 150 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +85 C2 C with no voltage applied and then being stabilized at +20 C capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k to 0.70 1.00 1.30 1.70 Dimensions in mm (not to scale) (Unit : mm) Sleeve 14 min. 0D0.5 3 min. F0.5 =L 010 05 to 08 0d0.05 Pressure relief (06.3) 0D0.5 = L16 : L1.0 L20 : L2.0 Body Dia. 0D 5 6.3 8 10 12.5 16 18 Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 - EEE-116 - Oct. 2013 Aluminum Electrolytic Capacitors/ SU(Bi-polar) Standard Products (Bi-polar) Endurance: 85 C 2000 h (1000 hours for each polarity) Case size W.V. (V) 6.3 10 16 25 35 Cap. (20 %) Dia. (F) (mm) 330 470 1000 2200 3300 4700 6800 47 100 220 330 470 1000 2200 3300 4700 10 22 33 47 220 330 470 1000 2200 3300 10 22 33 47 100 220 330 470 1000 2200 10 22 33 47 100 220 330 470 8 10 10 12.5 16 16 18 5 6.3 8 10 10 12.5 16 16 18 5 5 5 6.3 10 10 10 12.5 16 18 5 5 6.3 6.3 8 10 12.5 12.5 16 18 5 6.3 8 8 10 12.5 12.5 12.5 Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 C) (+20 C) (mm) (mA r.m.s.) () 11.5 12.5 20 25 25 31.5 35.5 11 11.2 11.5 16 16 20 25 31.5 35.5 11 11 11 11.2 12.5 16 20 25 31.5 35.5 11 11 11.2 11.2 11.5 16 20 20 25 35.5 11 11.2 11.5 11.5 16 20 20 25 250 310 430 660 760 1170 1450 90 130 200 280 340 470 690 1090 1200 40 60 80 100 260 330 380 560 750 900 45 60 90 110 180 320 350 430 680 900 43 80 100 120 230 360 450 590 0.30 0.30 0.30 0.32 0.34 0.36 0.40 0.25 0.25 0.25 0.25 0.25 0.25 0.27 0.29 0.31 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.22 0.24 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.17 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping Taping B i (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.8 0.8 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 3.5 5.0 5.0 5.0 7.5 7.5 7.5 2.0 2.5 3.5 5.0 5.0 5.0 7.5 7.5 7.5 2.0 2.0 2.0 2.5 5.0 5.0 5.0 5.0 7.5 7.5 2.0 2.0 2.5 2.5 3.5 5.0 5.0 5.0 7.5 7.5 2.0 2.5 3.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 Part No. (mm) 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 ECEA0JN331U( ) ECEA0JN471X( ) ECEA0JN102U( ) ECEA0JN222U( ) ECEA0JN332U( ) ECEA0JN472U ECEA0JN682U ECEA1AN470U( ) ECEA1AN101X( ) ECEA1AN221U( ) ECEA1AN331U( ) ECEA1AN471U( ) ECEA1AN102X( ) ECEA1AN222U( ) ECEA1AN332U ECEA1AN472U ECEA1CN100U( ) ECEA1CN220U( ) ECEA1CN330U( ) ECEA1CN470U( ) ECEA1CN221X( ) ECEA1CN331U( ) ECEA1CN471U( ) ECEA1CN102U( ) ECEA1CN222U ECEA1CN332U ECEA1EN100U( ) ECEA1EN220X( ) ECEA1EN330U( ) ECEA1EN470U( ) ECEA1EN101U( ) ECEA1EN221U( ) ECEA1EN331U( ) ECEA1EN471U( ) ECEA1EN102U( ) ECEA1EN222U ECEA1VN100U( ) ECEA1VN220U( ) ECEA1VN330U( ) ECEA1VN470U( ) ECEA1VN101U( ) ECEA1VN221U( ) ECEA1VN331U( ) ECEA1VN471U( ) Straight Taping Leads (pcs) (pcs) 200 200 200 200 100 100 50 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 200 100 50 200 200 200 200 200 200 200 200 100 50 200 200 200 200 200 200 200 200 1000 500 500 500 250 2000 2000 1000 500 500 500 250 2000 2000 2000 2000 500 500 500 500 2000 2000 2000 2000 1000 500 500 500 250 2000 2000 1000 1000 500 500 500 500 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 - EEE-117 - Oct. 2013 Aluminum Electrolytic Capacitors/ SU(Bi-polar) Standard Products (Bi-polar) Endurance: 85 C 2000 h (1000 hours for each polarity) Case size W.V. Cap. (20 %) Dia. (V) (F) (mm) 50 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 5 5 5 5 5 6.3 8 8 10 10 12.5 16 16 Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 C) (+20 C) (mm) (mA r.m.s.) () 11 11 11 11 11 11.2 11.5 11.5 12.5 20 25 25 31.5 10 10 18 25 30 50 90 110 140 250 360 450 590 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping Taping B i (mm) (mm) (mm) (mm) 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 2.0 2.0 2.0 2.0 2.0 2.5 3.5 3.5 5.0 5.0 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 2.5 2.5 2.5 2.5 Part No. ECEA1HNR47U( ) ECEA1HN010U( ) ECEA1HN2R2U( ) ECEA1HN3R3U( ) ECEA1HN4R7U( ) ECEA1HN100U( ) ECEA1HN220U( ) ECEA1HN330U( ) ECEA1HN470U( ) ECEA1HN101U( ) ECEA1HN221U( ) ECEA1HN331U( ) ECEA1HN471U Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 100 100 2000 2000 2000 2000 2000 2000 1000 1000 500 500 500 250 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 - EEE-118 - Oct. 2013